AVRIQ
Module
Switch
Rack of
Servers
Figure 1.2: Example AutoView 2000 Configuration
Safety Precautions
To avoid potential video and/or keyboard problems when using Avocent products:
•
If the building has 3-phase AC power, ensure that the computer and monitor
are on the same phase. For best results, they should be on the same circuit.
•
Use only Avocent-supplied cable to connect computers and KVM switches.
Avocent warranties do not apply to damage resulting from user-supplied cable.
To avoid potentially fatal shock hazard and possible damage to equipment,
please observe the following precautions:
•
Do not use a 2-wire extension cord in any Avocent product confi guration.
•
Test AC outlets at the computer and monitor for proper polarity and grounding.
•
Use only with grounded outlets at both the computer and monitor. When
using a backup power supply (UPS), power the computer, the monitor and
the appliance off the supply.
NOTE: The AC inlet is the main disconnect.
Chapter 1: Product Overview
AVRIQ
Switch
Module
Rack of
Servers
Analog Connection
Critical Server
Analog Connection
AV2000
5