Creating Your Own Programme; Programme Play - Sony MDS-JE480 Operating Instructions Manual

Playing an MD (continued)
Other Operations
To
Stop play
Pause play
Resume play
after pausing
Go to the next or
a succeeding
track during play
Go to a
preceding track
during play
Go to the
beginning of the
current track
during play
Go to a specific
track while the
deck is stopped
Find a point in a
track
Eject the MD
1) Automatic Music Sensor
2) When you locate a point while monitoring the
sound.
3) When you locate by observing the time
indication.
Tips
• The MDLP indicator lights up when you select a
track recorded in LP2 or LP4 Stereo mode.
• When "– Over –" appears in the display, the MD has
reached the end while you're pressing M. Turn
AMS counterclockwise (or press .) or press m
to go back.
Playing a track by entering the track
number
Press the number button(s) on the remote
to enter the track number of the track you
want to play.
To enter a track number over 10
1 Press >10.
"-" equal to the number of digits for the number
of tracks recorded on the MD flashes.
2 Enter the corresponding digits.
To enter 0, press 10/0 instead.
16
GB
Do this
Press x.
Press X.
Press H or X.
Turn AMS 1) clockwise (or press
> repeatedly).
Turn AMS counterclockwise (or
press . repeatedly).
Turn AMS counterclockwise (or
press . once).
Turn AMS (or press ./>
repeatedly) until the track number
you want to go to flashes in the
display, then press PUSH ENTER
or H.
Press down m/M during play
3)
or play pause . Release it when
you reach the desired point.
Press EJECT A after stopping
play.
Examples:
• To select track number 30 on an MD recorded
with 50 tracks, press >10, then 3 and 10/0.
• To select track number 30 on an MD recorded
with 200 tracks, press >10, then 10/0, 3 and 10/0.
Using the MD display
Press LEVEL/DISPLAY/CHAR (or DISPLAY)
repeatedly.
The display changes cyclically as follows:
During playing
Track number and elapsed time of the current
track t Track number and remaining time of
the current track t Remaining time of all
recorded tracks t Track name
Tip
To check the track name during playing (only when
the track name is recorded)
remote.
The track name appears and scrolls. While the track
name is scrolling, press the button again to pause
scrolling, and again to continue scrolling.
In stop mode
Total number of tracks and total recorded time
2)
t Remaining recordable time
(recordable MDs only) t Disc name
1) "No Name" appears when the disc or track has no
name.
2) Time shown in the display differs depending on
the setting of REC MODE.
Creating your own
programme

— Programme Play

You can pick out the tracks that you like and
specify the playing order in a programme
containing up to 25 tracks.
1
While the deck is stopped, press PLAY
MODE repeatedly until "PGM" lights up
in the display.
2
Turn AMS (or press ./>
repeatedly) until the track number you
want to add to the programme appears
(or use the number button(s) on the
remote to enter the track directly), then
press YES or PUSH ENTER.
"Step X (X: number of the entered tracks)"
appears, followed by total playing time of
the programme.
1)
,
press SCROLL on the
2)
on the MD
1)