Mercedes-Benz S 430 Operator's Manual page 172

Controls in detail
Control system
Activating easy-entry/exit feature
Use this function to activate and deacti-
vate the easy-entry/exit feature
( page 114).
Warning!
You must make sure no one can become
trapped or injured by the moving steering
wheel and driver's seat when the easy-en-
try/exit feature is activated.
To cancel seat/steering wheel movement,
do one of the following:
Press seat adjustment switch
( page 38).
Move steering column stalk
( page 40).
Press the one of the memory position
buttons or the memory button M
( page 129).
170
Do not leave children unattended in the ve-
hicle, or with access to an unlocked vehicle.
Children could open the driver's door and
unintentionally activate the easy-entry/exit
feature, which could result in an accident
G
and/or serious personal injury.
Move the selection marker with
the æ or ç button to
the CONVENIENCE submenu.
Press button j or k repeatedly
until you see this message in the multi-
function display: EASY-ENTRY FEATURE
.
ACTIVATE
The selection marker is on the current
setting.
Press æ or ç to change the
easy-entry/exit setting.
The following settings are available for the
easy-entry/exit feature:
OFF The easy-entry/exit fea-
ture is deactivated.
STEER. COL Only the steering column
is moved.
ST.COL+SEAT Both the steering column
and the driver's seat are
moved.
Setting parking position for exterior rear
view mirror
Use the MIRROR SETTING WHEN PARKING
function to select whether the passen-
ger-side exterior rear view mirror should be
turned downward during parking maneu-
vers when reverse gear R is engaged. For
additional information, see "Activating ex-
terior rear view mirror parking position"
( page 187).