Other Functions - Grundig YB 218 User Manual

SLEEP Function
• Press the button briefly.
– The unit switches on the radio and the display
will show the 60 minutes 'sleep' period.
• The 'sleep' time can be adapted to 60, 45, 30 and 15 minutes
by pressing the HOUR or MINUTE key several times.
– After the preset sleep time has elapsed, the radio will switch off
automatically.
• The SLEEP function can be terminated prematurely by pressing
the ON/OFF button.
LOCK function
The Lock function is used to prevent accidental operation or
changes to the settings (e.g. when travelling, etc.).
• Set the LOCK switch to the 'lock' position (up).
– The indication lights up on the display.
• Now you can only adjust E VOL., TUNING, FM/MW/SW
and MO/ST..
• Reset the LOCK switch in order to switch the lock function off
again.
Display Illumination
• Pressing the LIGHT key switches on the display illumination for
approx. 5 seconds.
• If you press another key of the unit, this illumination time will be
increased.
• If you wish to immediately switch off the display illumination,
press the LIGHT key once again.

OTHER FUNCTIONS

Recall function
• By pressing the RECALL key, you can call up the alarm time, the
global time or the remaining sleep time in the right time display.
RESET function
• If, due to external interferences (caused by static charges of
carpets, thunderstorms, etc.), the control electronics of your Yacht
Boy 218 should receive bad information signals, or if no entries
at all are possible, press the RESET key. For pushing this button, it
is best to use a bent-up paper clip.
– This releases the RESET impulse which in turn resets the unit to its
initial programming state.
– The stored data for the clock and alarm times is cleared.
Use of the stand
• Fold out the stand on the rear of the set. You can now use the set
in an inclined position.
Notes
The unit meets the CEE regulations concerning interference
radiation.
This product fulfills European directives 89/336/EEC, 73/23/EEC
and 93/68/EEC.
This set complies with the safety regulations according to VDE
0860 / BS 415 and thus with the international safety regulations
according to IEC 65.
The model number is located on the back of the set.
YB 218 page 21
GB
21