Miele Dishwashers Operating Instructions Manual page 52

Problem solving guide
Problem
Dishes, cutlery and
glasses are not dry
or are flecked.
White residue is
visible on cutlery
and crockery,
clouding occurs
on glassware; film
can be wiped off.
52
Possible cause
The amount of rinse aid may
be insufficient, or the rinse
aid reservoir empty.
Crockery was taken out of
the cabinet too soon.
Combination products have
been used which have
impaired drying
performance.
Not enough rinse aid was
used.
There is no salt in the salt
reservoir.
An unsuitable combination
detergent has been used.
The water softener is
programmed to a setting
which is too low.
Remedy
Replenish the reservoir,
increase the dosage or
change the brand of rinse
aid (see "Before using for the
first time: Rinse aid").
Leave it in for longer. See
"Operation".
Change your detergent, or
replenish the rinse aid (see
"Before using for the first
time - Rinse aid").
Increase the dosage (see
"Settings menu, Rinse aid").
Fill the salt reservoir (see
"Before using for the first
time - Filling the salt
reservoir").
Change your detergent. Use
a standard liquid, tablet or
powder detergent, and fill
the salt and rinse aid
reservoirs in the dishwasher.
Select a higher water
softener setting (see "Water
softener").