Powering On/Off - Alcatel OT-S920 User Manual

G71_UM_GB-21-09-07 21/09/07
2.6

Powering On/Off

2.6.1 Powering On
Ensure that the SIM card is in your phone and that the battery has been
charged.
Press and hold to power on your phone.
2.6.2 Powering Off
Press and hold to power off your phone.
2.6.3 Access Codes
If you have set the phone password and the PIN is ON, you have to enter
the corresponding access codes when you power on your phone. For
setting and changing the access codes, please refer to "Settings/Security
Setup".
• Phone Password
The phone password is used to protect your phone from unauthorized
use.The phone password is preset as 0000 for your phone.
• PIN
The personal identification number (PIN) code is used to protect your SIM
card from unauthorized use. The PIN code is usually provided when you
get the SIM card from your network operator. If you have not received a
PIN code or if you have forgotten it, contact your network operator.
21
8:38 Page 21
• PIN2
Some SIM cards provide a PIN2 code. Some special functions such as the
"Fixed Dialer Number" are not available until you enter the PIN2 code.
At the same time, your SIM card should support these functions.
• PUK
To unlock a locked SIM card, you need to enter the PIN Unblocking Key
(PUK) code.The PUK code is usually provided when you get the SIM card
from your network operator. If you have not received a PUK code or if
you have forgotten it, contact your network operator.
• PUK2
Some SIM cards provide a PUK2 code that is used to unlock a locked PIN2
code.The PUK2 code is usually provided when you get the SIM card from
your network operator. If you have not received a PUK2 code or if you
have forgotten it, contact your network operator.
22