Dodge Charger SRT8 2012 Specifications

2012 Dodge Charger SRT8

SPECIFICATIONS

All dimensions are in inches (millimeters) unless otherwise noted. All dimensions are measured at curb
weight with standard tires and wheels.
Note: Information shown is correct at time of publication, and is subject to change without notice.
GENERAL INFORMATION
Body Style
Assembly
EPA Vehicle Class
Introduction Date
ENGINE: 6.4L HEMI
Availability
Type and Description
Displacement, cu. in. (cu. cm.)
Bore x Stroke
Valve System
Fuel Injection
Construction
Compression Ratio
Power (SAE J2723)
Torque (SAE J2723)
Max. Engine Speed
Fuel Requirement
Oil Capacity, qt (l)
Factory Oil Fill
Coolant Capacity, qt (l)
Emission Controls
Fuel Economy mpg (city/hwy)
Assembly Plant
1 Meets Federal Tier 2 Bin 5 emission requirements and ULEV II requirements in California, Massachusetts, New York, Maine,
Vermont, Connecticut, Pennsylvania, Rhode Island, New Jersey, Oregon and Washington.
DODGE CHARGER SRT8 | Specifications
®
®
V8 WITH FUEL SAVER TECHNOLOGY
E-segment sedan
PlantBrampton Assembly Plant, Ontario, Canada
Large car
Summer 2011 as 2012 model
Standard
90-degree V-type, liquid-cooled
392 (6,424)
4.09 x 3.72 (103.9 x 94.5)
Pushrod-operated overhead valves, 16 valves with
sodium-filled exhaust valves and hollow stem intake valves,
16 conventional hydraulic lifters, all with roller tips
Sequential, multi-port, electronic, returnless; automatic
features Fuel Saver mode
Deep-skirt cast-iron block with cross-bolted main bearing
caps, aluminum alloy heads with hemispherical
combustion chambers
10.9:1
470 hp (351 kW) at 6,000 rpm
470 lb-ft (637 N•m) at 4,300 rpm
6,400 rpm (electronically limited)
Premium 91 octane (R+M)/2 — recommended
7 (6.6)
5W-40 synthetic
14 (13.25)
Dual close-coupled three-way catalytic converters, quad-
heated oxygen sensors and internal engine features
14 city / 23 hwy based on manufacturer's estimates
Saltillo Engine Plant, Saltillo, Mexico
[1]
1