Related Manuals for Crosley Washer
Summary of Contents for Crosley Washer
- Page 1 Crosley ® OWNERS GUIDE TUMBLE ACTION LAUNDRY CENTER MANUAL DEL USUARIO LAVADORA Y SECADORA SUPERPUESTAS DE ACCIÓN GIRATORIA www.crosley.com P/N 134888800B (0807)
-
Page 2: Table Of Contents
Suite 200 Winston Salem, NC 27103 WASHER SAFETY Your safety and the safety of others is very important. We have provided many important safety messages in the Use and Care Guide, Operating Instructions, Installation Instructions and on your appliance. -
Page 3: Important Safety Instructions
•Under certain conditions, hydrogen gas may be produced in a hot water system that has not been used for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not been used for such a period, before using the washer, turn on all hot water faucets and let the water flow from each for several minutes. -
Page 4: Washing Procedures
•The washer is equipped with an electrical overload protector. The motor will stop if it becomes overheated. The washer will automatically restart after a cool down period of up to 30 minutes, if the washer has not been manually turned off during this time. - Page 5 Closing the drawer too quickly could result in early the cycle. Either powdered or liquid detergent can be used. dispensing of the bleach and fabric softener. Note: Liquid detergent will drain into the washer drum as it • Dispenser drawer should be completely closed for powdered is added.
-
Page 6: Washing Procedures
• Do not open the dispenser drawer when the washer is running. • Do not slam the washer door closed or try to force the door open when locked (Door Lock light ON). This could result in damage to the washer. -
Page 7: Stain Removal
For successful stain removal: • Remove stains promptly. • Determine the kind of stain, then follow the recommended treatment in the stain removal chart below. • To pretreat stains, use a prewash product, liquid detergent, or a paste made from granular detergent and water. •... -
Page 8: Common Washing Problems
•Static cling is attracting lint. •Remove lint with lint brush or roller. •Load washed too long. Pilling •Use fabric softener in the washer to lubricate •Use a lint brush or shaver to remove pills. •Pilling is normal with synthetic and (Fibers break off, fibers. -
Page 9: Drying Procedures
Drying Procedures • Follow the guidelines below for preparing the load for drying. • Read the Dryer Operating Instructions for operating your specific model. • Always read and follow fabric care labels and laundry product labels. To reduce the risk of fire, electrical shock, or injury to persons, read Important Safety Instructions before operating this dryer. -
Page 10: Features
Lint •Reduce load size and rewash using liquid •Do not overload dryer. •Overloading. fabric softener in the final rinse. •Use fabric softener in washer or dryer to reduce •Overdrying causes static •Or, add a fabric softener sheet and tumble static electricity. -
Page 11: Care And Cleaning
Care and Cleaning TO REFRESH OR CLEAN INSIDE OF THE WASHER: IMPORTANT: Do not load garments or other items in the washer when cleaning the inside of the washer. • Add a 1/2 cup of liquid bleach to the detergent compartment of the dispenser drawer and fill the bleach dispenser compartment to the Max Fill level and run WITHOUT a clothes load using the Normal Cycle setting. - Page 12 Care and Cleaning Inside the Dryer • Clean the dryer lint screen after every load. Lint build-up in the screen restricts air flow, which causes longer drying times. The screen is located at the bottom of the door opening. Remove by pulling straight up. Remove the lint and replace the screen.
-
Page 13: Avoid Service Checklist
4. Add 1 gallon nontoxic recreational vehicle (RV) antifreeze to empty wash drum. Close door. 5. Set cycle selector knob at a spin setting. Pull out knob and let washer spin for 1 minute to drain out all water. Not all of the RV antifreeze will be expelled. - Page 14 • Water inlet hoses are kinked. Straighten hoses. Warm or hot water is not hot • Hot water heater is set too low or is a distance from washer. Measure hot water enough. temperature at nearby faucet with candy or meat thermometer. Water temperature should be at least 120°F (49°C).
- Page 15 OCCURRENCE POSSIBLE CAUSE SOLUTION DRYER Dryer does not start. Make sure the plug fits tightly in wall outlet. Electrical power cord is not securely plugged in or plug may be loose. Reset circuit breaker or replace fuse. House fuse blown or circuit breaker tripped.
-
Page 16: Warranty
If you need to order replacement parts, we recommend that you only use the factory specified parts. These parts will fit right and work right because they are made with the same precision used to build every new Crosley ® appliance.