Remote Control With Key Blade - Volvo S40 Manual

Locks and alarm

Remote control with key blade

Changing the remote control
battery
If the locks repeatedly fail to respond to
signals from the remote control at a normal
distance, the battery should be changed
(type CR 2032, 3 volt).
– Pull out the key blade.
– Place the remote control with the keypad
downward and remove the screw (1)
using a small screwdriver.
– Remove the cover.
– Carefully note the position of the battery's
+ and – poles on the inside of the cover.
VM
– Prise out (2) and change the battery.
Avoid touching the battery and its
terminals with your fingers.
– Refit the cover and screw it shut.
– Press the key blade back into place.
Dispose of the old battery in an environmen-
tally-friendly way.