Chassis; Adjusting The Front Brake; Adjusting The Rear Brake Light Switch - Yamaha YFM350XP Supplementary Service Manual

Hide thumbs Also See for YFM350XP:
Table of Contents

Advertisement

ADJUSTING THE FRONT BRAKE/

ADJUSTING THE REAR BRAKE LIGHT SWITCH

CHASSIS

ADJUSTING THE FRONT BRAKE
1.Check:
Brake lever free play a
Out of specification → Bleed the front brake
system.
Refer to "AIR BLEEDING (HYDRAULIC
BRAKE SYSTEM)" in CHAPTER 3. (Manual
No.: 3GD-28197-12)
Brake lever free play (at brake
lever end):
0 mm (0 in)
ADJUSTING THE REAR BRAKE LIGHT
SWITCH
NOTE:
The rear brake light switch is operated by
movement of the brake pedal.
The rear brake light switch is properly adjusted
when the brake light comes on just before the
braking effect starts.
1.Check:
Rear brake light operation timing
Incorrect → Adjust.
2.Adjust:
Rear brake light operation timing
***********************************************
Hold the main body 1 of the rear brake light
switch so that it does not rotate and turn the
adjusting nut 2 in direction a or b until the
rear brake light comes on at the proper time.
Direction a
Direction b
***********************************************
– 11 –
CHK
ADJ
Brake light comes on
sooner.
Brake light comes on
later.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents