Table of Contents
Advertisement
Use only the AC adapter and batteries that are supplied by your Myou S1024 Computer
manufacturer. Using other types of battery or AC adapter may heighten the risk of fire or explosion.
Incorrectly placed batteries may result in an explosion.
Replace only with the same or compatible battery recommended by the manufacturer.
Please discard used batteries according to the manufacturer's instructions.
Before you connect your Myou S1024 Computer to a power source, ensure that the voltage rating
of the AC adapter matches that of the available power source.
-
115 V/60 Hz in most of North and South America and some Far Eastern countries such as
South Korea.
-
100 V/50 Hz in eastern Japan and 100 V/60Hz in western Japan.
II
-
230 V/50 Hz in most of Europe, the Middle East, and the Far East.
If you use an extension cord with your AC adapter, ensure that the total ampere rating of all
devices plugged into the extension cord does not exceed its total capacity.
When removing battery from your Myou S1024 Computer, first turn off the system, disconnect the
AC adapter from the electrical outlet, then remove the battery.
To avoid risk of an electrical shock, do not connect or disconnect any cables, or perform
maintenance or reconfiguration of this product during a thunderstorm.
Do not throw batteries into fire, doing so may cause explosion. Check with local authorities first for
battery disposal instructions.
NOTICE: When taking your Myou S1024 Computer from a colder to a warmer environment or vice
versa, allow your Myou S1024 Computer enough time to adapt to the new environment before turning
on power.
Advertisement
Table of Contents
