Baby Monitor; Call Tone Settings; "Roger Beep" Confirmation Tone - Cobra MT 975 User Manual

10376 MT975UK.qxd
MODE FUNCTIONS

Baby Monitor

With the Baby Monitor Function ON, a radio left
near a baby will transmit to another unit on the
same channel and privacy code whenever a sound
is detected. Baby Monitor uses the same
sensitivity level you set for the VOX Function.
If you have not set a VOX sensitivity level
(see the "Voice Activated Transmit [VOX]" section
of this manual), the maximum sensitivity, level 5,
will automatically be used.
To Turn Baby Monitor ON:
1. Press MODE button until the
Baby Monitor icon flashes on
the display. The current OFF
setting is displayed.
2. Press the CHANNEL UP or
CHANNEL DOWN button to change
the setting to ON.
3. Press the LOCK/ENTER button to enter the
ON setting and enter BABY MONITOR MODE.
NOTES: Pressing the MODE button will enter the
BABY MONITOR MODE setting as OFF and
proceed to other MODE functions.
Not pressing any buttons for 15 seconds
will enter the BABY MONITOR MODE
setting as OFF and return the radio to
LISTENING MODE.
NOTE: Both radios must be tuned to the same
channel and privacy code to communicate.
To Terminate Baby Monitor Mode:
Choose one of the following:
a. Press the TALK button and return to
LISTENING MODE.
b. Press the LOCK/ENTER button and return to
LISTENING MODE.
c. Press the MODE button and proceed to
the next available MODE function.
1/15/08 4:05 PM

10 Call Tone Settings

You can choose between 10 different call tone
settings to transmit a unique call alert.
To Change a Call Tone Setting:
1. Press the MODE button
until the letter "C" and the
current call tone number
(1 to 10) is displayed. The
current call tone will sound
for two (2) seconds.
2. Press the CHANNEL UP or CHANNEL DOWN
Select Baby Monitor button to hear the other call tone settings.
3. Choose one of the following:
a. Press the MODE button to enter the new
setting and proceed to other functions.
b. Press the LOCK/ENTER button to enter the
new setting and return to LISTENING MODE.

"Roger Beep" Confirmation Tone

Your listener will hear an audible tone when
you release the TALK button. This alerts the other
party that you have finished talking and that it is
OK for them to speak. This feature can be turned
ON or OFF.
To Turn "Roger Beep" ON or OFF:
When you turn ON your microTALK
the first time, "Roger Beep" will be ON.
1. Press and release the MODE
button until the "Roger
Beep" icon flashes on the
display. The current ON or
OFF setting is displayed.
2. Press the CHANNEL UP or CHANNEL DOWN
button to select "Roger Beep" ON or OFF.
3. Choose one of the following:
a. Press the MODE button to enter the new
setting and proceed to other functions.
b. Press the LOCK/ENTER button to enter the
new setting and return to LISTENING MODE.
The setting you select will be saved when you
turn your radio OFF and ON again. When the
"Roger Beep" is ON, the "Roger Beep" icon
will be displayed.
Page 9
English
Call Tone Setting
radio for
®
Select Roger Beep