Polaris SPORTSMAN FOREST 800 Series Owner's Manual page 86

MAINTENANCE
Active Descent Control (ADC) Fluid
If your vehicle is equipped with Active Descent Control, there are two
fluid levels that must be maintained (demand drive fluid and ADC
fluid). See page 82 for demand drive fluid maintenance.
Check and change the ADC fluid level at the intervals outlined in the
Periodic Maintenance Chart beginning on page 73. Maintain the fluid
level between the minimum and maximum marks on the reservoir. We
recommend the use of POLARIS Demand Drive PLUS Fluid. See page
130 for the part numbers of POLARIS products.
NOTICE: Do not use brake fluid. Brake fluid will damage rubber components in
the hydraulic system.
1. Open the front box cover.
2. Remove the access panel screws.
Squeeze the outer edges of the
panel inward to remove the panel.
3. View the fluid level in the reser-
voir.
4. If the level is below the minimum
mark, remove the cap and add the
recommended fluid.
5. Reinstall the cap.
6. Reinstall the access panel and
secure the front box cover.
86
ADC Fluid
Reservoir