Polycom SoundPoint IP 550 User Manual page 15

To attach the base as a wall mount:
Place all cords in the recessed area above the modular jacks.
1.
On the back of the phone, remove the key located behind the hookswitch
2.
and reposition it so that the end tab (at a 45
With the base unit facing up, fasten it to the wall mount using wall
3.
anchors.
The wall mount is not included in SoundPoint IP 550/560 package. Contact your
Note
system administrator if you require one.
Getting Started with Your Phone
0
angle) is facing up.
1 - 9