Table of Contents
Advertisement
Assigning an IP Address
8
Using the AXIS IP Installer
The AXIS IP Installer is a Windows 95/98 & NT program that sets the camera server IP address
for you. It also allows you to access the camera server home page via a Web browser. The program
is available on the AXIS Online CD and on the Axis Web Site at http://www.axis.com/
Installing the AXIS IP Installer
1. On the AXIS Online CD, click on the Software button.
2. Select the IP Installer and click Install. The AXIS IP Installer - Setup dialog is displayed on
the screen.
3. Follow the instructions as they appear on the screen.
4. Click Finish to complete the setup.
Setting the IP Address
1. Run the AXIS IP Installer from the Start menu. The AXIS IP Installer dialog is displayed on
the screen.
2. Restart your camera server.
3. Select the serial number of your camera server in the list. The serial number is identical to the
Ethernet address of the unit.
4. Enter the desired IP address. Click Set IP address. The IP address will now be set.
5. To access the home page of the camera server, click Home page of selected Axis-server... You
can now configure the camera server according to your requirements.
6. Click OK to exit the program.
For more help during the installation of the IP address, click Help or F1.
Using ARP in Windows 95/98 and Windows NT
To download the IP address and verify the communication, start a DOS window and type the
following commands:
arp -s <camera IP address> <Ethernet address>
ping <camera IP address>
Example:
arp -s 192.16.253.80 00-40-8c-10-00-86
ping 192.16.253.80
The host will return '
the address has been set and the communication is established.
Reply from 192.16.253.80 ...
AXIS 200+ and 240 User's Guide
' or some similar message. This means that
Advertisement
Table of Contents
