Adding Variations To The Sound - Reverb - Yamaha Arius YDP-140 Owner's Manual

Adding Variations to the Sound – Reverb
This control enables you to select various digital reverb effects that add extra depth and expression
to the sound to create a realistic acoustic ambience.
Procedure
While holding down the
[PIANO/VOICE]
a reverb type.
The lowest key
Key Reverb Type
C2 Room This setting adds a continuous reverb effect to the sound, similar to
the acoustic reverberation you would hear in a room.
C 2 Hall1 For a "bigger" reverb sound, use the HALL 1 setting. This effect simu-
lates the natural reverberation of a small-size concert hall.
D2 Hall2 For a truly spacious reverb sound, use the HALL 2 setting. This effect
simulates the natural reverberation of a large concert hall.
D 2 Stage Simulates the reverb of a stage environment.
E2 Off No effect is applied.
Adjusting Reverb Depth
Adjust the reverb depth for the selected voice by pressing one of the C3–G 4 keys while
holding down the
[PIANO/VOICE]
The lowest key
While holding down the
[PIANO/VOICE]
the depth most suitable for the selected voice.
button, press one of the C2–E2 keys to select
C 2 D 2
C2 D2 E2
Description
button. The depth range is from 0 through 20.
C3: depth 0
The depth value increases as you press higher keys.
button, press the A4 key to set the reverb to
Selecting & Playing Voices
The default reverb type (includ-
ing OFF) and depth settings are
different for each voice.
G 4: depth 20
depth 0: no effect
depth 20: maximum reverb
depth
A4
YDP-160/140
Owner's Manual 21