Table of Contents
Advertisement
Installation Instructions
1
Attention: The new appliance may only be installed and connected by
a registered expert.
Please comply with this. If you do not, any damage resulting is not cov-
ered by the warranty.
1
Safety information for the installer
• The electrical installation is to be set up so that the appliance can be
isolated from the mains with a minimum 3mm all-pole contact sepa-
ration.
Suitable separation devices include e.g. cut-outs, fuses (screw fuses
are to be taken out of the holder), RCD's and contactors.
• Anti-shock protection must be provided by the installation.
• The built-in unit must meet the stability requirements of DIN 68930.
Connect the Armour Cable into the junction box, and connect the wires
according to National and Local electrical codes.
53
Hide quick links:
Advertisement
Table of Contents
