Graco iMonitor 2797 Owner's Manual page 35

2. Pair the Parent Unit with the Nursery Unit
• If the Parent Unit is not on, turn it on now.
• The Parent Unit will display "Looking for a Nursery
Unit to pair with. Turn on your Nursery Unit now."
• Place the Nursery Unit in the same room, as the Par-
ent Unit.
• Turn on the Nursery Unit using the On/Off Button
on the side. The green power light should come on.
• Within a few seconds, the Parent Unit will find the
Nursery Unit. The Parent Unit will display "Nursery
Unit found. Pairing complete."
• The Parent Unit will begin monitoring normally.
Nothing happened when I turned on the Nursery
Unit. What do I do?
• With the Parent Unit on, turn the Nursery Unit off,
and then on again.
• If there is still a problem, repeat steps 1 and 2.
5