CD (incl. VCD)
Be sure to set "AUTOPLAY" of the SETUP screen to "ON" before executing the following
*
procedures.
Refer to the attached "OPERATING INSTRUCTIONS" for details of the operation of
*
DN-V200/DN-V300.
(The reference item in parentheses shows "OPERATING INSTRUCTIONS" item.)
Repeat playback the specified Track of CD
I
1
Setup Procedure
(1) Load CD into DN-V200/DN-V300.
(Refer to
7
(2) Start the CD playback after LOADING.
When VCD is loaded, PBC (Play Back Control) is automatically turned off and the
*
playback starts.
(3) Playback Track that wants to Repeat playback.
(Refer to
9
INSTRUCTIONS".)
(4) Set Repeat Mode to Track Repeat.
(Refer to 10 PLAYING REPEATEDLY of "OPERATING INSTRUCTIONS".)
When Repeat Mode is set, the Track number while playback in progress is memorized.
(5) Check the playback is begun from the beginning of the Track again when the playback of
Track ends.
(6) Power OFF.
2
Checking Procedure
(1) Power ON.
(2) After Loading, check the memorized Track number is automatically play backed.
(3) Check memorized Track is Repeat play-backed.
II
Repeat playback all Track of CD sequentially
Setup Procedure
1
(1) Load CD into DN-V200/DN-V300.
(Refer to
7
(2) Start the CD playback after LOADING.
When VCD is loaded, PBC (Play Back Control) is automatically turned off and the
*
playback starts.
(3) Set Repeat Mode to Disc Repeat.
(Refer to 10 PLAYING REPEATEDLY of "OPERATING INSTRUCTIONS".)
(4) Check the playback is begun from (Track 1) first again when the playback of all Track in Disc
ends.
(5) Power OFF.
Checking Procedure
2
(1) Power ON.
(2) After Loading, check the Track 1 is automatically play backed first.
(3) Check all Track in Disc is sequentially Repeat play-backed.
LOADING DISCS of "OPERATING INSTRUCTIONS".)
PLAYBACK and
13 USING THE ON-SCREEN DISPLAY of "OPERATING
LOADING DISCS of "OPERATING INSTRUCTIONS".)
4