HTC Desire 4G LTE User Manual page 149

149 Internet connections
3. Tap Wi-Fi.
Detected Wi-Fi networks will be listed.
If the wireless network that you want is not listed, tap
add it.
4. Tap the Wi-Fi network you want to connect to.
If you selected a secured network, you'll be asked to enter the network key or
password.
5. Tap Connect.
When HTC Desire 4G LTE is connected to the wireless network, the Wi-Fi icon
appears in the status bar and tells you the approximate signal strength.
The next time HTC Desire 4G LTE connects to a previously accessed secured wireless
network, you won't be asked to enter the key or other security information again,
unless you reset HTC Desire 4G LTE to its factory default settings.
Disconnecting from the current wireless network
1. Slide the Notifications panel open, and then tap
2. Tap Wi-Fi.
3. You can:
§ Tap the wireless network that HTC Desire 4G LTE is connected to, and then
tap Disconnect.
§ If you want to remove the settings for this network, press and hold the
network name, and then tap Forget network.
Connecting to a different Wi-Fi network
1. Slide the Notifications panel open, and then tap
2. Tap Wi-Fi. Detected Wi-Fi networks are displayed.
To manually scan for available Wi-Fi networks, tap
3. Tap a Wi-Fi network to connect to it.
Connecting to a Wi-Fi network using enhanced security
You may need to install a network certificate (*.p12) to HTC Desire 4G LTE before
you can connect to a Wi-Fi network with EAP-TLS authentication protocol.
1. Save the certificate file to the root folder of the storage card.
2. Slide the Notifications panel open, and then tap
3. Tap Install from storage card.
> Add network to manually
.
.
> Scan.
> Security.