Electrolux EUF2500AOW User Manual page 16

16 www.electrolux.com
WARNING!
Reposition, level the appliance,
wait for at least four hours and then
connect it to the power socket.
Do a final check to make sure that:
• All screws are tightened.
• The magnetic seal adheres to the cabi-
net.
• The door opens and closes correctly.
WARNING!
If the ambient temperature is cold
(i.e. in Winter), the gasket may not
fit perfectly to the cabinet. In that
case, wait for the natural fitting of
the gasket.
• Unscrew the lower hinge. Change the
position of the pin and buffert. Screw the
lower hinge on the opposite side.
• Tighten the pin with the adjustment
spanner supplied.
• Raise the appliance and install the venti-
lation grille.
• Remove the covers on the handles care-
fully with a small screwdriver.
• Unscrew the handle.
• On the opposite side remove the hole
covers by driving a 3-4 mm drift or drill
into them.
• Install the handle.
• Install the covers on the handle.
• Install the hole covers provided within the
accessory bag.
• Put the cabinet in position.