KC218S INSTRUCTION MANUAL Contents Warnings & Precautions ... 2 Important Safety Instructions... 3 In the Box & Features... 4 Mounting the Unit & Powering the Unit... 5 Setting the Clock & Kitchen Timer ... 6 Tuning the Radio & Battery Backup ... 7 Playing a CD...
Warnings and Precautions TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. This symbol, located on back or bottom of the unit, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Important Safety Instructions 1. Read Instructions - All the safety and operating instruction should be read before the product is operated. . Retain Instructions - The safety and operating instruction should be retained for future reference. 3. Heed Warnings - All warning on the product and in the operating instructions should be adhered to.
Page 4
In the Box • UnderCabinet CD Player & Radio • Remote Control • 4-Spacers & 4-Screws • Mounting Template • Documentation Features • Slim Drawer-Load CD/CD-R/RW Player with Programmable Tracks, Re- peat Play & Skip/Search • AM/FM Radio with Digital Readout Display •...
Powering the Unit 1. To power the unit, simply connect it to an AC outlet using the attached AC cord. . The plastic extensions on the back of the unit provide a holder for excess cord. Battery Backup Use 3 AAA Batteries to serve as a backup power source for the clock only. (Batteries not included) Changing the Remote Battery 1.
Setting the Clock 1. Plug the unit into a standard 10V outlet. See “Powering the Unit”. . With the unit powered off, press and hold the PROG/CLK Set Button for 4 seconds. 3. Press the Skip/Search Buttons to adjust the hour and minute of the clock. 4.
Tuning the AM & FM Radio 1. Turn the unit on by pressing the Power Button. . Press the Function Button to switch to Radio Mode. 3. Press the Band Button to select AM or FM radio band. 4. Turn the Tuning Dial to tune the radio.
Programing a CD 1. After loading a CD for play, press the Function Button and switch to CD Mode. . Press the PROG/CLK Set Button. The number “01” will appear on the LCD Display. This indicates that the next track selected will be the first to play. 3.
. Turn the unit on by pressing the Power Button. 3. Press the Function Button until the unit is in Aux Mode. 4. Audio played through the connected Mp3 Player or Other Audio Source will now be heard from the unit.
Control Definitions: Front Views 1 CD Drawer The CD Drawer will load and play CD or CD-R/RW discs. 2 LCD Display The LCD displays clock, radio, and CD information. 3 Power Button Press the “ ” Button to turn the unit off and on. 4 Volume Buttons Press the Volume Buttons to adjust the volume of the unit.
Page 12
Location of Controls: Side & Back Views...
Page 13
Use the AC Cord Hooks to wrap and store excess from the AC Cord. 16 AUX Inputs Use the AUX (Auxiliary) Inputs to play audio from an Mp3 Player or Other Audio Source on the unit. 17 Attached AC Cord Plug in the Attached AC Cord to a standard 10V outlet to provide power to the unit.
Page 15
Control Definitions: Remote 21 Power Button Press the “ “ Button to turn the unit off and on. 22 DISP Button Press the Display Button to display the time when in Radio Mode. 23 Skip/Search/MIN Button Press the Skip/Minute Button to skip between tracks on a CD or change the minute when setting the clock.