Table of Contents
Advertisement
10 electrolux
Soil Level
Icon
Quick
1)
Super Quick
1) We recommend you to reduce the load sizes
(see Washing programmes table).
Important! The Time Manager cannot be
selected with the Economy programmes.
The availability of these soil level icons
change according to the type of fabric as
shown in the following chart.
Fabric
Cottons
95°/90°C
X
60°C/50°C
X
40°C
X
30°C
X
Cold
X
Synthetics
60°C/50°C
40°C
30°C
Cold
Delicates
40°C
30°C
Cold
Altering an option or a running
programme
It is possible to change some options before
the programme carries them out .
Before you make any change, you must
PAUSE the appliance by pressing the button
8 (if you wish to change the Time Manager
option, you must cancel the running pro-
gramme and make your selection again).
Changing a running programme is possible
only by resetting it. Turn the programme se-
lector dial to
and then to the new pro-
gramme position. Start the new programme
by pressing the button 8 again. The washing
water in the tub will be not emptied out.
Type of fabric
For very slightly
soiled items
For items used or
worn for a short time
Soil Level
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Interrupting a programme
Press the button 8 to interrupt a programme
which is running, the corresponding green
pilot light starts blinking.
Press the button again to restart the pro-
gramme.
Cancelling a programme
Turn the selector dial to
gramme which is running.
You can select now a new programme.
Opening the door
After the programme has started (or during
the delay time) the door is locked, if you need
to open it, set first the machine to PAUSE by
pressing the button 8 .
After a few minutes the pilot light 9 goes out
X
and it is possible to open the door.
X
If this pilot light remains lit, this means that
X
the machine is already heating or that the
X
water level is too high. In any case, do not try
to force the door!
X
If you cannot open the door but you need to
open it you have to switch the machine off by
X
turning the selector dial to O . After a few mi-
nutes the door can be opened (pay atten-
X
tion to the water level and tempera-
X
ture!) .
X
After closing the door, it is necessary to se-
lect the programme and options again and to
press button 8 .
X
At the end of the programme
X
The machine stops automatically. Three
X
blinking 0.00 appear on the display and the
pilot light of button 8 goes off. Some acoustic
signals sound.
If a programme or an option that ends with
water left in the tub has been selected, the
door remains locked to indicate that the wa-
ter must be emptied out before opening the
door.
Follow the below instructions to empty out
the water:
1. Turn the programme selector dial to O .
2. Select the draining or spinning pro-
gramme.
3. Reduce the spin speed if needed, by
pressing the relevant button.
4. Press button 8 .
At the end of the programme, the door is re-
leased and can be opened. Turn the pro-
to cancel a pro-
Advertisement
Table of Contents
