Supero SUPERSERVER 5016T-TB User Manual page 88

S S
UPER ERVER 5016T-TB User's Manual
CPU Temperature/System Temperature
This feature displays current temperature readings for the CPU and the System.
The following items will be displayed for your reference only:
System Temperature
The item displays the absolute temperature as detected by the BIOS.
CPU Temperature
The item displays the level of CPU temperature (High, Medium, Low) as detected
by the BIOS. The information shown in the screen is for your reference only. (See
the notes below for more information on PECI and TControl.)
•
CPU Temperature Setting - Low:
ment Control Interface) count is below or equal to TControl-10
Count<=TControl-10
•
CPU Temperature Setting - Medium:
0
TControl - 10 C but below TControl. (TControl-10
•
CPU Temperature Setting - High:
TControl. (TControl<PECI Count)
Notes:
1. According to Intel's specifi cations, PECI and TControl are defi ned as follows:
•
PECI (Platform Environmental Control Interface): PECI is a bus interface
that provides a communication channel between Intel processor/chipset
components to external thermal monitoring devices. It sends readings from
the Digital Thermal Sensor (DTS) located in the processor to an external
device for fan control purposes. PECI replaces the thermal diode available
in the older versions of processors.
•
TControl: TControl is a temperature reading from the Digital Thermal Sensor
(DTS) in the CPU used for fan speed control mechanisms. It can be referred
to as a trigger point to trigger a CPU Overheat/Fan Control alarm.
2. The information provided above is for your reference only. For more informa-
tion on thermal management, please refer to Intel's Web site at www.Intel.
com.
When CPU PECI (Platform Environ-
0
C.)
When CPU PECI count is greater than
When CPU PECI count is greater than
7-18
0
C. (PECI
0
C<PECI Count<=TControl)