GPX PF118R Instruction Manual

PF118R/PF118S - Digital Picture Frame Ornament

Warnings and Precautions

This symbol, located on back or bottom of the
unit, is intended to alert the user to the presence of
uninsulated "dangerous voltage" within the product's
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO
WIDE SLOT, FULLY INSERT.
To reduce the risk of electric shock, do not remove cover (or back). There are no user-
serviceable parts inside. Please refer any servicing to qualified service personnel.
WARNING: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
WARNING: To prevent fire or shock hazards, do not expose this unit to rain or moisture.
WARNING: Danger of explosion if the unit's batteries are incorrectly installed. Replace only
with the same or equivalent battery.
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, etc) batteries.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Powering the Unit

The unit is powered by loading two AAA batteries (not included)
into the battery compartment.
Please note, when powered on, the unit can last approximately 6
hours off of two AAA batteries.
In the Box
• PF118
• USB Cable
• File Conversion / Compression Software CD
Features
Digital Photo Frame displays photos and pictures
• JPEG/BMP/GIF Picture File Format
• Delete Function
1.5" Color Display
• 128 x 128 Pixel, 65K Color
Supports USB Sync
• Supports Multiple Picture Download at one time from PC through
Conversion Program
Digital Clock and Calendar
Auto Power Off Interval Selection (None, 3, 5 , 10, 15, 30, 45, 60 Minutes)
• Auto On/Off Times
Installed Flash Memory
• Can Store up to 180 pictures
DC-Powered:
• Uses 2 x "AAA" Batteries, (not included)
This symbol, located on back or bottom of the unit, is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
Parts Information
Address:
2116 Carr Street, St. Louis MO, 63106
Phone: 1-314-621-2881
Fax: 1-314-588-1805
Email: partsinfo@dpi-global.com

Service Information

Address:
2116 Carr Street, St. Louis MO, 63106
Phone:
1-314-621-2881
Fax:
1-314-588-1805
Email:
prodinfo@gpx.com
Website:
www.gpx.com
Version:
v. 073108
To download this Instruction Manual in English, Spanish, or French visit the Support
section at www.gpx.com.
Para descargar este manual de instrucción en inglés, español, o francés visite la sec-
ción de la ayuda en www.gpx.com.
Pour télécharger ce manuel d'instruction en anglais, espagnol, ou le Français visitez
la section de soutien à www.gpx.com.
Automatic Power Off
The Auto Power Off feature can be set from the unit's menu.
Step 1:
With the unit powered on, press the
Step 2:
Highlight "Auto Power Off" using the
and press the Menu Button to select the highlighted option.
Step 3:
Use the Directional Buttons to highlight on of the following
options:
3, 5, 10, 15, 30, 45, or 60 minutes, or Off.
• The default setting for the Auto Power Off feature is 30
minutes.
Step 4:
The unit will power off after the selected amount of time has
expired.
Automatic On/Off
Step 1:
With the unit powered on, press the
Step 2:
Press the Directional Buttons to highlight "Auto On/Off",
and press the Menu Button.
Step 3:
Press the Directional Buttons to highlight "Auto On" or
"Auto Off".
Auto On - Select to enable the automatic on/off feature and set
the time.
Auto Off - Select to disable the automatic on/off feature.
Step 4:
Press the Menu Button.
Step 5:
After selecting "Auto On", use the
the "On" hour.
Step 6:
Press the Menu Button.
Step 7:
Use the Directional Buttons to set the "On" minute.
Step 8:
Menu Button.
Press the
Step 9:
Directional Buttons to set the "Off" hour.
Use the
Step 10:
Menu Button.
Press the
Step 11:
Use the Directional Buttons to set the "Off" minute.
Step 12:
Press the Menu Button.
© 2008 Digital Products International (DPI, Inc.)
All other trademarks appearing herein are the property of their respective owners.
Menu Button.
Directional Buttons,
Menu Button.
Directional Buttons to set