Table of Contents
Advertisement
To activate
Select a hotplate.
1.
Select power level
and then press the + symbol. The
Š
2.
function has been activated.
Time program function
This function allows the selected hotplate to be switched off
automatically after a preset time by inserting the cooking time.
How to program
This function allows the selected hotplate to be switched off
automatically after a preset time. The hotplate will switch off
once this time has elapsed.
The range should be switched on.
Select the required hotplate and power level.
1.
Then press the
r
symbol until the
The indicator lights up on the selected hotplate.
Set the time using the + or - symbols.
2.
+ = 30 minutes
- = 10 minutes
Automatic time limitation
If the hotplate remains in use for a long time and no changes
are made in the settings, the automatic time limitation function
is triggered.
The hotplate stops heating. On the hotplate display,
flash alternately.
The indicator goes out when any symbol is pressed. The
hotplate can now be reset.
When the automatic time function is used, it is governed by the
selected power level (from 1 to 10 hours).
8
‹‹
indicator is displayed.
"
and
‰
To deactivate
Select a hotplate.
1.
Press the - symbol. The
2.
hotplate will return to the
The Powerboost function has been deactivated.
Note: In certain circumstances, the Powerboost function may
turn off automatically in order to protect the electronic
components inside the hob.
After a few seconds, the timer will start to count down.
Once the time has elapsed
The hotplate turns off, there is a warning sound and the
indicator lights up. Press the
and the sound stops.
To cancel or change the time
Select the hotplate with the
and change the cooking time using the + or - symbols, or set
to
.
‹‹
Note: Any cooking time can be programmed up to 99 minutes.
symbol will disappear and the
›
power level.
Š
symbol. The indicators go out
r
symbol. Press the
§
r
‹
symbol
Advertisement
Table of Contents
