Ford Mustang Owner's Manual page 154

Cleaning
moldings, mirror housings or the windshield cowl
area. The paint sealant will "gray" or stain the
parts over time.
PAINT CHIPS
Your dealer has touch-up paint and sprays to match
your vehicle's color. Take your color code (printed
on a sticker in the driver's door jam) to your dealer
to ensure you get the correct color.
• Remove particles such as bird droppings, tree sap,
insect deposits, tar spots, road salt and industrial
fallout before repairing paint chips.
• Always read the instructions before using the
products.
ALUMINUM WHEELS AND WHEEL COVERS
Aluminum wheels and wheel covers are coated with
a clearcoat paint finish. In order to maintain their
shine:
• Clean weekly with Motorcraft Wheel and Tire
Cleaner (ZC-37–A), which is available from your
dealer. Heavy dirt and brake dust accumulation
may require agitation with a sponge. Rinse
thoroughly with a strong stream of water.
• Never apply any cleaning chemical to hot or warm
wheel rims or covers.
• Some automatic car washes may cause damage to
the finish on your wheel rims or covers.
Chemical-strength cleaners, or cleaning chemicals,
in combination with brush agitation to remove
brake dust and dirt, could wear away the
clearcoat finish over time.
• Do not use hydrofluoric acid-based or high
caustic-based wheel cleaners, steel wool, fuels or
strong household detergent.
• To remove tar and grease, use Motorcraft Bug and
Tar Remover (ZC-42), available from your dealer.
154
2004 Mustang (mus)
Owners Guide (post-2002-fmt)
USA English (fus)