Electrolux EWF 10480 W User Manual page 13

Electrolux washing machine
Table of Contents

Advertisement

Detergents and additives
Good washing results also depend on the
choice of detergent and use of the correct
quantities to avoid waste and protect the en-
vironment.
Although biodegradable, detergents contain
substances which, in large quantities, can
upset the delicate balance of nature.
The choice of detergent will depend on the
type of fabric (delicates, woollens, cottons,
etc.), the colour, washing temperature and
degree of soiling.
All commonly available washing machine de-
tergents may be used in this appliance:
• powder detergents for all types of fabric
• powder detergents for delicate fabrics
(60°C max) and woollens
• liquid detergents, preferably for low tem-
perature wash programmes (60°C max)
for all types of fabric, or special for wool-
lens only.
The detergent and any additives must be
placed in the appropriate compartments of
the dispenser drawer before starting the
wash programme.
If using liquid detergents, a programme
without prewash must be selected.
Your appliance incorporates a recirculation
system which allows an optimal use of the
concentrated detergent.
Programme - Maximum and Minimum Tempera-
ture - Cycle Description - Maximum Spin Speed -
Maximum Fabrics Load - Type of Laundry
COTTONS
90° - Cold
Main wash - Rinses
Spin at maximum speed
Max. load 7 kg - Reduced load 3.5 kg
White and coloured cotton (normally soiled items).
COTTONS ECONOMY
90° - 40°
Main wash - Rinses
Spin at maximum speed
Max. load 7 kg
White and fast coloured cotton .
This programme can be selected for slightly or normally
soiled cotton items. The temperature will decrease and
the washing time will be extended. This allows to obtain
a good washing efficiency so saving energy.
Follow the product manufacturer's recom-
mendations on quantities to use and do not
exceed the «MAX» mark in the detergent
dispenser drawer .
Degrees of water hardness
Water hardness is classified in so-called "de-
grees" of hardness. Information on hardness
of the water in your area can be obtained
from the relevant water supply company, or
from your local authority.
A water softener must be added when
water has a medium-high degree of
hardness (from degree of hardness II).
Follow the manufacturer's instructions.
The quantity of detergent can then al-
ways be adjusted to degree of hardness
I (= soft).
Level
1
2
3
4
Options
RINSE HOLD
EASY IRON
EXTRA RINSE
1)
TIME MANAGER
RINSE HOLD
EASY IRON
EXTRA RINSE
electrolux 13
Degrees of water
hardness
Charac-
teristic
German
°dH
soft
0-7
medium
8-14
hard
15-21
very hard
> 21
Detergent Com-
partment
SPIN
SPIN
French
°T.H.
0-15
16-25
26-37
> 37

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents