8
TROUBLESHOOTING
8
Press Button B or C to adjust the
indicator hand as shown in the figure
Adjust the indicator hand to the
position as shown in the figure.
If the indicator hand points as shown in the
figure, go to operation of 9.
The indicator hand makes one complete turn,
but this does not mean a failure.
If no operation is performed for more than 1 minute or when Button A is
pressed once, the watch returns to the time display mode.
When the watch has returned to the time display mode, restart operation.
When operation is
9
completed, press Button A
and then release it
The mode to adjust the
preliminary position is completed,
and the second hand and hour/
minute hands start moving.
Slightly
moves the
Button A
hand
clockwise
If the button is kept pressed
for 2 seconds, the hand
moves continuously.
Press the button again to
stop the hand.
Slightly
moves the
hand
counter-
clockwise
ASTRON 7X52 GPS SOLAR
Set the time (0)
10
Set the time by
receiving GPS signals
When you are in a place where GPS signals can be easily
received
(P .
13), adjust the time zone.
How to adjust the time zone
If GPS signals are received after the system
reset, leap second data are also received.
P . 30
When you are in a place where GPS signals cannot be received
1 Carry out manual time zone setting
How to manually set the time zone
2 Manually set the time How to manually set the time
3 Manually set the date How to manually set the date
When the time and date are set, operation is completed.
50
After operation of 1 to 9 is
completed, make sure to set the
time.
P. 14 ~ 16
P . 20
P . 43
P . 44