Step 8 Order Optional Internal Usb 2.0 Drive - Cisco UCS B22 M3 User Manual

CONFIGURING the SERVER
STEP 8 ORDER OPTIONAL INTERNAL USB 2.0 DRIVE
You may order one optional internal USB 2.0 drive. The USB drive ordering information is listed
in Table 13.
Table 13
Product ID (PID)
UCS-USBFLSH-S-4GB
See Figure 6 on page 33
22
USB 2.0 Drive
PID Description
4GB Flash USB Drive (shorter length) for all servers except C260
NOTE: A clearance of 0.950 inches (24.1 mm) is required for the USB device to be
inserted and removed (see the following figure).
for the location of the USB connector.
NOTE: When the Cisco 4GB USB key is purchased with a server, it is pre-installed
into the internal USB port and held firmly in place with a clip to protect it from
shock and vibration during shipment and transportation. This clip also prevents the
USB key from undergoing shock and vibration during ongoing customer operational
use.
Cisco UCS B22 M3 Blade Server