Table of Contents
Advertisement
E N G L I S H
Changing Product Mode
The G1 sensor has two product modes: mode 1
and mode 2. Mode 1 is compatible with RS200,
RS400, S625X and S725X.
To change the mode, press the button for ten
flashes when the sensor is activated. A satellite
indicator led flashes four times; the red led
indicating mode 1 activation or the green led
indicating mode 2 activation.
Battery Replacement
The red battery indicator led flashes, when
battery is low (Picture 5 b). Change the battery
yourself by following the instructions in Using
the Polar G1 Sensor.
Use an AA-sized alkaline battery. We
recommend you use a lithium battery or
rechargeable NiMH battery in temperatures 5°C
and below. Cold temperature decreases the life
of an alkaline battery.
Keep batteries away from children. If
swallowed, contact a doctor immediately.
Batteries should be disposed of in compliance
with local regulations.
Care and Maintenance
The following instructions will help you fulfill guarantee
obligations.
• Wash the armband in a washing machine at 40°C /
104°F. Use a washing pouch. Do not soak, nor use
detergent with bleach or fabric softener. Do not
dry-clean. Do not spin-dry or iron.
• Clean the sensor with a mild soap and water solution.
Dry it with a towel. Never use alcohol or abrasive
materials (steel wool or cleaning chemicals). Never
put the sensor in a washing machine or drier.
4
Advertisement
Table of Contents
