Perform The Final Check; Visual Inspection; Setting She Flush Power To On And Off - Olympus PFL-01 Instruction Manual

Perform the final checks.

Visual Inspection

After sealing the Case, check the sealing part of front and rear lid
visually to confirm that the O-ring is not twisted or out of the groove
and that no foreign matter has been caught.
CAUTION : • Hairs, fibers, and other narrow items are not very apparent,
but they may cause entry of water, so that special attention
is required.
Setting the flash power to ON and OFF
Turn the mode dial knob and confirm that the electronic flash can
be turned ON and OFF.
Also turn the mode dial knob and confirm that the flash's mode dial
can be switched to TTL AUTO and MANUAL.
CAUTION : • After inserting the flash into the case, confirm that the mode
dial moves. If it does not move, oil or grease may have
gotten on the mode dial. Wipe it clean.
E-20