Servicing - AEG ÖKO FAVORIT 6480 Operating Instructions Manual

Aeg dishwasher
Table of Contents

Advertisement

Servicing

Before calling our service centre, please check whether you can rectify the fault
yourself by following the instructions given below. Should this information be of
no assistance to you in a specific case, please contact our service centre.
The following flashing alarms appear on the display (the machine does
not start, or the machine stops during operation.
ALARM A6
The machine does not drain water.
The drain hose is bent.
Straighten out the bend and press the On/Off button.
The sink drain is blocked.
Clear the drain and press the On/Off button.
The drain hose extension is not correct.
Follow the instructions for connecting to the waste carefully and press the
On/Off button.
The wall drain has no vent-hole.
Consult a qualified technician.
ALARM A3
The dishwasher is stopped.
The spray arms are not turning because they are stopped by incorrectly
loaded dishes.
Load the dishes correctly so that the spray arms can rotate freely and press
the On/Off button.
If the alarm reappears, call the Service Centre.
ALARMS A1 - A2 - A7
General.
Press the On/Off button.
If the alarm persist, call the Service Centre.
67

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents