AEG ÖKO_SANTO SUPER Operating Instructions Manual page 26

What to do if ...
Malfunction
Interior lighting does not
work.
Heavy build up of frost,
possibly also on the door
seal.
Water on the floor or on
storage shelves.
Unusual noises.
The compressor does not
start immediately after
changing the temperature
setting or after pressing
the FAST CHILL button.
26
Possible Cause
Light bulb is defective.
Door seal is not air tight
(possibly after changing
over the hinges).
Water drain hole is
blocked.
Appliance is not level.
Appliance is in contact
with wall or other objects.
A part at the back of the
appliance, e.g. a tube, is in
contact with another
appliance part or the wall.
This is normal, no error has
occurred.
Remedy
Please look in the "Replace
Light Bulb" section.
Carefully warm the leak-
ing sections of the door
seal with a hair dryer (not
hotter than approx. 50 °C).
At the same time shape the
warmed door seal by hand
such that it sits correctly.
See the "Cleaning and
Maintenance" section.
Readjust the front levelling
feet.
Push appliance away a
short distance.
Bend this part away care-
fully if necessary.
The compressor starts after
a period of time.
818 17 78-00/5