AEG COMPETENCE 5212 BU Operating Instructions Manual page 64

Place the heat deflector flush with the edge
of the worksurface, (see Fig. 15) with the cork
spacers upover (see Fig.16) and screw into
position using the screws supplied with the
cooker.
Failure to do this may cause damage to the
underside of the work surface.
Replace the plinth board.
Switch on the cooker and refer the user to the
operating instructions.
64
WORK TOP
Fig.15
Fig.16
HEAT SHIELD.
LEVEL WITH
FRONT EDGE OF
WORK TOP
TOP OVEN
DOOR