Baby Trend Flex-Loc Owner's Manual page 15

• For the 5-point harness models, place seat pad on Safety
Seat, threading the Harness straps through the Pad bottom
slots and pulling the Buckle through the opening at the
rear of the flap on Pad. Thread the Harness Straps
through Buckle Tongues and Harness-Tie. See section
Adjustment of the Shoulder Straps for re-threading of
shoulder straps.
• To re-install the Harness straps on the adjustable seat
back model, move the Seat Back to its highest positition,
then follow steps iii - ix of section Adjustment of the
Shoulder Straps.
• For the EZ5 harness Safety Seat, pull the Buckle through
the opening at the rear of the flap on Pad. Place the seat
pad on the Safety Seat and see section Adjustment of the
Shoulder Straps for re-threading of shoulder straps.
Inspect the Harness Straps from the front and rear to ensure
that they are not twisted. Twisted straps can prevent proper
tightening of the Harness and thus may not adequately restrain
your child in a sharp turn, sudden stop or crash. Before using
the Safety Seat, please pull on the Harness Straps from the
front to ensure that they are securely re-attached.
If You Need Help or Replacement Parts
Please call our Customer Service Department at (800) 328-7363
between the hours of 8:00 am and 4:30 pm, Pacific Standard Time,
Monday through Friday.
Or visit us online at www.babytrend.com
56
57