Electrolux EDC 5340 Instruction Booklet page 9

125980810 gb.qxp 2005-01-24
This code will reappear during the execution of the
programme if you press one of the option buttons or
turn the programme selector.
The same code will appear again also when you
push the Start/Pauze button while the door and
small door are opened.
• Alarm code
In case of a functional anomaly, the display shows
an alarm code (e.g. E21). See page 14 for more
detailed information.
8 Start/Pause button - "Start/Pauze"
Press this button to start the dryer after having
selected the programme and the options.
The relevant light will stop flashing. If you have
chosen a delayed start, the machine will begin the
countdown.
If the door of the appliance or the small door at
the bottom is opened while the programme is
running, this button must be pressed again after
closing the door in order to restart the programme
from the point at which it was interrupted.
This button must be depressed also after a power
failure and after having re-inserted the water
reservoir, if it has been emptied in the middle of a
programme after lighting up of light "Waterhouder"
In both cases the light of the Start/Pauze button
flashes to remind you that the start button needs to
be pressed again.
07:21 Page 9
9 Indicator lights
These lights indicate the following functions:
"Drying" light - "Drogen"
This light indicates that the appliance is in the drying
phase.
"Cooling" light- "Afkoelen"
This light indicates that the appliance is in the
cooling phase. At the end of drying, there is a
10 minute cooling phase to cool the laundry.
"End of programme" light - "Einde"
This light is on at the end of the cooling phase,
during the anti-creasing phase and at the end of the
programme.
"Filter cleaning" light - "Pluizenfilters"
This light illuminates at the end of the programme to
remind you that the filters must be cleaned.
"Water reservoir full" light - "Waterhouder"
This light comes on at the end of the programme to
remind you that the water reservoir must be emptied
out. If this light illuminates during a programme this
means that the water reservoir is full. The buzzer
sounds, the programme stops, the light of the
Start/Pause button flashes.
"Condenser cleaning" light- "Condensor"
It comes on every 80 cycles to remind you that the
condenser must be cleaned.
9