Reversing The Door - AEG ARCTIS Operating Instructions Manual

Reversing the Door

The side at which the door opens can be changed from the right side
(factory adjustment) to the left side, if the installation site requires.
1
Warning! When changing the side at which the door opens, the
appliance may not be connected to the mains. Remove plug from the
mains beforehand.
0
1. Pull base cover forward to
remove and reposition the door
pivot cover from the left to the
right.
2. With door closed screw pivot pin
(A) out of the lower door pivot
and remove washer (B).
3. Remove door carefully to the
front and set aside.
4. Reposition upper pivot pin to the
left side.
5. Pry out cap at upper left of the
door with a small screwdriver
and reposition it to the right
side.
6. Carefully set door into upper
pivot pin and close.
14