BT FREELANCE XD5500 User Manual page 37

Switch on your answering machine from another phone
If you forget to switch on your answering machine, you can do
it from another phone.
1. Dial your phone number and let it ring. After 20 rings, your
answering machine will switch on.
Operating your answering machine from another phone
1. Call your BT Freelance XD 5500. When you hear the outgoing
message, press
2. The machine announces, "Please enter your security code".
Use the phone's keypad to enter your 3-digit PIN (default PIN:
000). The machine announces, "You have 'x' new messages",
and they are played.
3. Using the phone's keypad you can replay, pause, skip or delete
messages and adjust settings.
To hear the menu options.
To play/pause/restart your messages.
To play new messages only.
Once to repeat the current message; twice to skip back to
previous messages.
To delete the current message.
To delete the current message.
If you experience any problems, please call the Helpline on 0870 605 8047* or email bt.helpdesk@suncorptech.com
.
Using the answering machine
Power failure
If the mains power is lost, your
answering machine will keep many
personalised settings when it is
switched on.
The settings after a power
failure will be:
Outgoing message As last set by you
Answer Delay As last set by you
On/Off As last set by you
Message indicator Flashing, if any
messages have
been recorded
Messages Saved
Volume As last set by you
or level 5 default
PIN As last set by you
or 000 default
Day/time Saturday
12:01 PM
If you make a mistake when entering
your PIN you will hear, "Incorrect
security code, please enter your
security code." Enter the correct PIN.
The default PIN code is 000.
If you make a mistake again, you will
hear, "Incorrect security code", then a
beep and the machine will hang up.
If you pause for over a minute without
entering the code, the machine will
hang up.
37