Register A Different Manufacturer's; Handset To Your Base; Selecting A Base - BT FREELANCE XD 5100 User Manual

Naming additional handsets
Once you have registered additional
handsets you may wish to give them a
different name, see page 29.
IMPORTANT
DECT GAP Profile only guarantees that
basic calling-functions will work
correctly between different
makes/types of handset and base.
There's a possibility that certain
services such as Caller Display will not
work correctly.
If you experience any problems, please call the Helpline on 0870 605 8047* or email bt.helpdesk@suncorptech.com
When a handset is registered to a base, it is automatically
assigned a number which is displayed on the handset and
must be used for internal calls.
If registration does not work:
• Try again selecting a different base number.
• Make sure there is no other electrical equipment very close by
that may interfere with the registration signal.
Register a different manufacturer's handset to your
BT Freelance XD 5100 base.
1. At the base: Press and hold
beep. You now have 90 seconds to register the handset.
2. At the handset: Follow the registration instructions given in
your handset's user guide.

Selecting a base

When your handset is registered to more than one base, for
example, one at work and one at home, you can select the
base you want it connected to.
If you select , your handset will automatically search for
AUTO
and connect with the base with the strongest signal.
Additional handsets and bases
for 6 seconds until you hear a
37