Handset Settings - BT DIVERSE 2020 POCKET User Manual

• Press the
LEFT/RIGHT
set the volume or tone required.
The ringer or tone is played for you.
• Press the button to confirm.
OK
To adjust the ringer volume in the
base station
There are seven levels: 0 = off,
6 = high. (Default setting is 6.)
#
INT SET
• Press the button.
INT
• Press the button
SET
• Press the # button.
• Press the button.
• Press the button. Display shows
5
the volume level set. Ringer sounds
a sample level.
• Press a button between
to set the new level. Display shows
6
the new level.
• Press the
SET
the setting.
To adjust the tone of the base
station ringer
There are six levels: 1 = low, 6 = high.
(Default setting is 1.)
#
INT
SET
• Press the button.
INT
• Press the button
SET
• Press the # button.
• Press the button.
• Press the button. Display shows
6
the volume level set.
• Press a button between
the new level. Display shows the new
level.
• Press the
SET
the setting.
buttons to
.
a A
JKL
0
5
(OFF) –
0
button to confirm
a A
MNO
1- 6
6
to set
1-6
button to confirm

Handset settings

The handset setting menu allows the
following settings to be changed.
Beeps You can switch advisory and
warning beeps on or off. Switching
them off will save battery energy but
may deprive you of information you
may need while using your phone.
Each time you press
•
Button beep
a button, the action is confirmed by
a beep. Default setting is ON.
•
Battery warning beep
when the battery needs charging.
Default setting is ON.
•
Range warning
the handset is too far from the base
station. Default setting is OFF.
•
In-range beep
handset has just logged on to a base
station. The handset will only log
on to a base station if it is within
range and is registered with it.
Default setting is OFF.
•
Confirmation beep
you have followed procedures
correctly. Default setting is ON.
Lets you know that you
•
Error beep
have made a mistake during a
procedure. Default setting is ON.
Auto Backlight The screen and the
buttons light up whenever a button
is pressed. This can be switched on
or off.
Auto Talk When on, the handset
automatically answers an incoming call
when it is lifted off the base station
or charger. This can be switched off
so that you have to press the
button to answer a call.
Tells you
Tells you when
Tells you the
Confirms that
PHONE
21