Electrolux EDC 510E Instruction Booklet page 9

125992513 _1.qxp 2005-02-01
6 Indicator lights
These lights indicate the following functions:
DRYING light
This light indicates that the appliance is in the drying
phase.
COOLING light
This light indicates the appliance is in cooling phase.
At the end of the drying cycle, there is a 10 minute
cooling phase to cool the garments.
END light
This light is on at the end of the cooling phase,
during the anti-creasing phase and at the end of the
programme.
CLOGGED FILTERS light
The light illuminates at the end of the program to
remind you the filters must be cleaned.
FULL TANK light
The light comes on at the end of the programme to
remind you the water reservoir must be emptied. If
the light illuminates during the program the water
reservoir is full. The buzzer sounds, the program
stops and the Start/Pause button flashes.
CLOGGED CONDENSER light
The clogged condenser light comes on after every
80 cycles to remind you the condenser needs to be
cleaned.
14:17 Page 9
7 Programme/Time selector dial
Allows you to select electronically controlled or time
controlled drying.
Turn the dial to the required programme or time.
Electronically controlled drying
(automatic)
The dryer runs these programs with the help of
probes, which detects the degree of dampness of
the garments.
Simply select the program according to the type of
garment and the degree of drying required.
Time controlled drying
Can be used to finish off drying if necessary.
Select the 90 or 60 minute programme for cottons
or the 30 minute programme for synthetics.
To cancel a programme which is running, turn the
programme selector dial to "O".
At the end of drying, turn the selector dial to "O" to
switch the machine off before removing the laundry.
9