60
Configuring the G65
Speaker size
Digital Surround
Controller
These tests allow you to determine the bass handling
capability of subwoofers and large analogue speakers.
Once set, the digital surround controller will limit the
bass level to protect the speakers from potential
damage.
On starting the test the speaker sizes are set to zero to
avoid the possibility of damaging the speakers, and the
display shows:
Sizes set to zero
The display then shows the first large analogue
speaker; for example:
Left
•
Press A or V to adjust the size value for the speaker
until it just begins to distort distinctly, and then reduce
the value by one.
•
Press > or < to move between each of the speakers
to be adjusted.
This is the last test in the calibration procedure; see To
complete the calibration procedure , page 57.
Press More for help
ìî
ïñ
óòô
öõú
Press More for help
Size
0
ìî
ïñ
óòô
öõú