Table of Contents
Advertisement
•
To prevent the build-up of heat in the receiver, leave enough space around it (at least 10 cm to
each side). Place the receiver away from any source of heat, like heaters or direct sunlight. Never
close the ventilation openings!
•
Some connections mentioned in this guide require cables that are not included with your receiver.
Starting your TCX-170 Digital TV receiver for the first time
When the decoder is powered up for the first time, or is brought out of standby with no services, a welcome
screen will be displayed. Please press the <OK> key on your remote control and a full frequency service scan
will start.
This scan can take several minutes. When this operation is completed, all available services will be stored as
channels, and your set-top box will be ready to use.
Setup Menu
The setup menu contains all options to set your preferences and technical settings of the TCX-170 Digital TV
Receiver.
To open the setup menu, open the main menu and select the setup menu option with the up/down keys and
press the OK key. Or you can simply press the Setup key and the setup menu will open.
Languages
In the languages menu you can set the default languages for subtitles, data services, audio and the general
menu language.
Subtitles
Here you can select the default text language to be used for DBV subtitles. To set the subtitle language, open
the language menu and select the subtitle option with the up/down keys. Select the desired language with
the left/right keys. Press the Exit key to exit the menu.
Data Services
Here you can set the default text language to be used for MHEG data services. To set the data service
language open the language menu and select the data service option with the up/down keys. Select the
desired language with the left/right keys. Press the Exit key to exit the menu.
Advertisement
Table of Contents
