Maintenance; Resetting The Motor Thermostat - Euro-Pro Infinity NV22-FS Owner's Manual

Maintenance

Resetting the Motor Thermostat

Your Infinity Upright Vacuum is equipped
with a protective Motor Thermostat. If
the motor should overheat, the
thermostat shuts off the power.
To reset the Motor Thermostat:
Move the Power Button to the
"O – Off" position.
Unplug the vacuum.
Check for clogged hose or filter; unclog
hose and replace filter. Refer to
Checking for Blockages on page13.
Wait 45 minutes for vacuum to cool;
then plug in the vacuum.
Turn the Power Switch to the "I – On"
position to start the vacuum.
Note: if vacuum still does not start,
contact Customer Service at:
1-888-668-9600.
12