Select And Start A Washing Programme - Electrolux FAVORIT 55010 VIL User Manual

24

Select and start a washing programme

Select and start a washing programme
Select the washing programme and delay start with the door slightly opened. The
start of the programme or the countdown of the delay start will occur only after
the closure of the door. Until then it is possible to modify the settings.
1. Check that the baskets have been loaded correctly and that the spray arms are
free to rotate .
2. Check that the water tap is opened.
3. Press the On/Off button: all the programme lights illuminate and in the display
3 horizontal lines are visible (setting mode).
4. Press the button corresponding to the required programme (see "Washing
programmes" chart). The light corresponding to the selected programme will
illuminate.
Close the dishwasher's door, the programme starts automatically and in the digital
display 1 horizontal line is visible and will remain on for all the duration of the
programme.
Setting and starting the programme with "delay start"
1. After having selected the washing programme, press the delay start button
until the flashing number of hours for the delay start will appear in the digital
display. You can choose from 1 to 9 hours of delay. .
2. Close the dishwasher's door, the countdown starts automatically.
3. The countdown will decrease with steps of 1 hour.
4. The opening of the door will interrupt the countdown.
5. Once the delay start has elapsed the programme will start automatically.
Once the washing programme has started, a point-shaped optical signal appears
on the floor beneath the dishwasher's door.
This optical signal will remain illuminated for all the duration of the washing pro-
gramme.
If the appliance has been installed higher up with a furniture door mounted flush,
the optical signal will be no longer visible.
Cancelling the "delay start" and / or a washing programme
• To cancel a delay start in progress you have to reset the dishwasher.