Introduction; Environmental Protection; Description Of Symbols; Specifications - GMC ST1800 Instruction Manual

Dear Customer
If you require any help with your product, whether it
is a Warranty claim, spare part or user information,
please phone our Help Line for an immediate response.
Phone 1300 880 001 in Australia or 0800 445 721 in
New Zealand.

Introduction

Your new GMC power tool will more than satisfy your
expectations. It has been manufactured under stringent
GMC Quality Standards to meet superior performance
criteria.
You will find your new tool easy and safe to operate,
and, with proper care, it will give you many years of
dependable service.
Caution. Carefully read through this entire Instruction
Manual before using your new GMC Power Tool. Take
special care to heed the Cautions and Warnings.
Your GMC power tool has many features that will make
your job faster and easier. Safety, performance, and
dependability have been given top priority in the
development of this tool, making it easy to maintain
and operate.

Environmental protection

Recycle unwanted materials instead of
disposing of them as waste. All tools, hoses
and packaging should be sorted, taken to
the local recycling centre and disposed of
in an environmentally safe way.

Description of symbols

The rating plate on your tool may show symbols. These
represent important information about the product or
instructions on its use.
Wear hearing protection. Wear eye protection.
Wear breathing protection.
Double insulated for
additional protection.
Conforms to relevant standards for
electromagnetic compatibility.

Specifications

Voltage:
Input power:
Speed:
Maximum Air Speed:
Collection Bag Capacity:
Mulching Ratio:
Insulation:
Weight

Safety instructions

The tool must be used only for its prescribed purpose.
Any use other than those mentioned in this Manual will
be considered a case of misuse. The user and not the
manufacturer shall be liable for any damage or injury
resulting from such cases of misuse.
To use this tool properly, you must observe the safety
regulations, the assembly instructions and the operating
instructions to be found in this Manual. All persons who
use and service the machine have to be acquainted with
this Manual and must be informed about its potential
hazards. Children and infirm people must not use this
tool. Children should be supervised at all times if they
are in the area in which the tool is being used. It is
3
230–240 Vac ~ 50Hz
1800W
15000 RPM
240 km/h
35 Litre
10:1
Double insulated
5kg