Clutch Lever - Yamaha Virago XV535 Owner's Manual

Virago 2000
Hide thumbs Also See for Virago XV535:
Table of Contents

Advertisement

INSTRUMENT AND CONTROL FUNCTIONS
3
1. Engine stop switch
2. Light switch
3. Start switch "
"
4. Fuel reserve switch "FUEL"
Engine stop switch
Set this switch to "
gine in case of an emergency, such as
when the motorcycle overturns or
when the throttle cable is stuck.
Light switch
Set this switch to "
auxiliary light, meter lighting and tail-
light. Set the switch to "
the headlight also.
Start switch "
Push this switch to crank the engine
with the starter.
CAUTION:
@
See page 5-1 for starting instruc-
tions prior to starting the engine.
@
Fuel reserve switch "FUEL"
During normal operation, this switch
should be kept in the "ON" position. If
EAU00138
you run out of fuel while riding, set the
switch to "RES", refuel as soon as pos-
" to stop the en-
sible, and then set the switch back to
"ON".
NOTE:
@
After switching to "RES", approximately
EAU00134
2.5 L of fuel remain in the fuel tank.
@
" to turn on the
" to turn on
EAU00143
"
EC000005

1. Clutch lever

EAU00149
Clutch lever
The clutch lever is located at the left
handlebar grip. To disengage the
clutch, pull the lever toward the handle-
bar grip. To engage the clutch, release
the lever. The lever should be pulled
rapidly and released slowly for smooth
clutch operation.
The clutch lever is equipped with a
clutch switch, which is part of the ignition
circuit cut-off system. (See page 3-10
for an explanation of the ignition circuit
cut-off system.)
3-3
EAU00152

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents