Yamaha Thunderace YZF1000R Owner's Manual page 32

1. Rebound damping force adjuster
Adjusting rebound damping force
Turn the adjusting knob in direction a
to increase rebound damping force and
in direction b to decrease rebound
damping force.
CI-29E
Minimum (soft) 20 clicks out*
Standard 10 clicks out*
Maximum (hard) 0 clicks out*
* From the fully turned-in position
INSTRUMENT AND CONTROL FUNCTIONS
1. Compression damping force adjusting screw
Adjusting compression damping
force
Turn the adjusting screw in direction a
to increase compression damping
force and in direction b to decrease
compression damping force.
CI-28E
Minimum (soft): 0 clicks in*
Standard: 10 clicks in*
Maximum (hard): 24 clicks in*
* From the fully turned-out position
3-18
WARNING
@
This shock absorber contains high-
ly pressurized nitrogen gas. Read
and understand the following infor-
mation before handling the shock
absorber. The manufacturer cannot
be held responsible for property
damage or personal injury that may
result from improper handling.
Do not tamper with or attempt to
open the cylinder assembly.
Do not subject the shock ab-
sorber to an open flame or other
high heat source. This may
cause the unit to explode due to
excessive gas pressure.
Do not deform or damage the
cylinder in any way. Cylinder
damage will result in poor
damping performance.
Take your shock absorber to a
Yamaha dealer for any service.
@
EAU00315
3