Operation - Telex SoundMate SR-50 Operating Instructions Manual

OPERATION

General
The Telex SR-50 single channel receiver operates on 17
factory preset channels in the 72 to 76 MHz frequency band
and is designed to operate with the Telex TW-6, AAT-2,
PST-16, ST-200, PST-170, and ST-300 transmitters.
To operate the SR-50 Receiver:
1. Select a suitable location for the receiver, and try to keep
a clear, unobstructed path between the transmitter and
the receiver antenna for clear reception.
2. Plug the earphone into the receiver jack.
3. Rotate the VOLUME OFF/ON control slowly in the clock-
wise direction while monitoring the volume level.
4. When satisfied with the volume level, place the receiver
in a pocket or clip it to your belt for convenience.
5. Always return the VOLUME OFF/ON control to the OFF
position when the receiver is not in use to preserve bat-
tery life and prevent battery leakage.
-3-